The maintenance of the air filter for WF series generator set is an important part to ensure the normal operation of the generator and extend its service life. The following are detailed precautions for maintaining the air filter of Weifang series generator sets:
1、 Daily maintenance of air filters for WF series generator set
Regular inspection:
Regularly inspect the appearance of the air filter to ensure that it is not damaged, deformed, or clogged.
Check the indicator of the air filter (if equipped), and promptly handle it when the indicator shows that it needs to be replaced or cleaned.
Clean the dustpan:
For the Weifang series generator set bowl coarse filter, when the dust accumulation in the dust tray reaches the calibration line, the nut on the cover of the bowl coarse filter should be unscrewed in a timely manner, the dust tray should be removed, and the dust accumulation in the tray should be cleaned up.
Clean the main filter element of the air filter for the Weifang series generator set:
When the air filter maintenance indicator displays a red signal or after 150-200 hours of use, the machine should be stopped for maintenance.
If the filter element is not too dirty, it can be directly blown clean with compressed air, but it should be noted that the air pressure should not be too high and the nozzle should not be too close to the filter element to avoid damaging it.
If the filter element is too dirty, use specialized cleaning solution to clean it, and then dry it with an electric heater.
2、 Regular replacement of air filters for WF series generator set
Weifang series generator set air filter replacement cycle:
Regularly replace the air filter according to usage and manufacturer's recommendations.
Replacement steps:
Stop the machine and disconnect the power supply.
Loosen the fixing screws or buckles of the air filter and remove the old air filter.
Check the installation position of the air filter to ensure that the new filter is installed correctly.
Install the new filter in place and tighten the fixing screws or buckles.
Start the generator and check if the filter is installed correctly and if there is any air leakage.
3、 Precautions for Air Filters of WF series generator set
Correctly installed:
When installing the air filter, it should be ensured that all sealing gaskets and rubber connecting pipes are installed correctly, without missing, reverse, or incorrect installation.
Ensure that the installation position of the air filter is correct, the air inlet direction is reasonable, and avoid inhaling dust and debris.
Anti damage:
Be careful when cleaning and replacing the air filter to avoid damaging the filter element and filter housing.
It is strictly prohibited to clean the filter element with oil or water to avoid damaging its filtering performance.
Environmental cleanliness:
Regularly check the environment around the generator to keep it clean and dust-free. Avoid using the generator in dusty environments to reduce the burden on the air filter.
Record maintenance status:
Every time the air filter is cleaned or replaced, the maintenance status should be recorded, including maintenance time, maintenance content, replaced parts, etc. For future reference and analysis.
By following the above maintenance precautions, the normal operation and extended service life of the air filter for WF series generator set can be ensured. At the same time, it also helps to improve the performance and reliability of the generator, ensuring its stable operation.
